What to do if my LG LCE3010SB does not work?
If your LG Cooktop isn't working, first check if the cooktop controls are locked; if so, use the Child Lock feature to unlock them. Also, check your circuit breaker and reset it if it has tripped, or replace any blown fuses. Confirm that there isn't a power outage by checking your house lights. If the installation wiring is incomplete, contact the installer or dealer.
Why my LG LCE3010SB Cooktop does not work?
If your LG Cooktop isn't working, there might be a few reasons. First, check if the cooktop controls are locked; if so, disable the CHILD LOCK feature. Also, check your circuit breaker and reset it if it has tripped, or see if a fuse is blown. Confirm that you don't have a power outage by checking your house lights. If none of these solve the issue, the installation wiring may not be complete, and you should contact the installer or dealer.
What to do if my LG LCE3010SB Cooktop does not heat?
If your LG Cooktop isn't heating, ensure the correct control is turned ON for the cooking zone you're using. If that's not the issue, refer to the 'Cooktop does not work' section for further troubleshooting steps, as there may be a power issue.
Why is my LG Cooktop flashing?
If your LG Cooktop is flashing, it could be due to a few reasons. Clean the surface, as food or spills on the touchpads can cause this. Make sure there isn't any object placed on the touchpad. If any key is touched for more than 10 seconds continuously, this error will be displayed. If water or a metal object is placed on the touchpad this error will be displayed. You can also try turning the cooktop off and on using the Power ON/OFF button.
Why are the elements on my LG LCE3010SB not getting hot enough?
If the elements on your LG Cooktop aren't getting hot enough, check that the power level is set properly on the control panel. Also, ensure you are using the recommended cookware of the correct size and with a flat bottom. Refer to the Cookware section for more details.
Why LG Cooktop elements do not get hot enough?
If the elements on your LG Cooktop aren't getting hot enough, first check the power level to ensure the touch controls are set properly. Also, make sure you're using cookware that is the correct size, shape, and flatness for optimal contact with the element. Using recommended cookware can make a big difference.
What to do if my LG Cooktop is flashing repeatedly?
If your LG Cooktop is flashing repeatedly, there may be a fault with the thermistor or Micom. Try turning the cooktop off and then back on using the Power ON/OFF button.
Why can I hear a fan sound from my LG LCE3010SB?
Hearing a fan sound from your LG Cooktop is normal when the cooktop inner temperature is high. The cooling fan will run when any element is turned on, and with heavy use, it may continue to run after the controls are turned off until the cooktop has cooled.
Why LG Cooktop elements turn off while cooking?
If the elements on your LG Cooktop turn off while cooking, it could be due to the cooktop's inner temperature being too high. Ensure that the cooktop has been installed according to the installation instructions.
What to do if my LG Cooktop is flashing and indicating low voltage?
If your LG Cooktop is flashing, it indicates low voltage detection. In this case, you should call a licensed electrician to check the power supply.
Critical warnings to prevent serious injury or death during appliance use.
Precautions to prevent minor injuries or product damage.
Preparatory steps and safety checks before installing the cooktop.
Details electrical specifications, wiring, and connection procedures for installation.
Instructions on operating the cooktop, setting power levels, and turning elements on/off.
Common issues with the cooktop and their possible causes and solutions.
General| Style | drop-in; electric; smoothtop |
|---|---|
| Color | black |
| Griddle | no |
| Glass Surface | yes |
| Induction | no |
| Number of Burners | 5 |
| Downdraft Vent | no |
| Control Type | smoothtouch; touch sensor |
| Fuel | electric |
| Voltage | 240/208 volts |
| Current | 40 |
Weight and Dimensions| Depth | 21 1/2 inch |
|---|---|
| Height | 4 inch |
| Width | 30 27/32 inch |
| Cutout Depth | 20 1/4 inch |
| Cutout Width | 29 3/8 inch |
To Next Page