Need help?Do you have a question about the LG LDCS24223S and is the answer not in the manual?
Procedure for removing and replacing the refrigerator door.
Instructions for door gasket removal.
Steps to align refrigerator doors.
Procedure for removing the evaporator fan and motor.
Steps for removing the defrost control assembly.
Instructions for removing refrigerator and freezer compartment lamps.
Steps to remove the multi duct.
Procedure for removing and replacing the main PCB.
Detailed steps for removing and reinstalling the pullout drawer.
Instructions for removing and installing the top pull-out drawer.
Explains the role and usage notes for the freezer drawer compressor.
Explains the role and usage notes for the freezer swing model compressor.
Information on the PTC starter, its composition, and role.
Defines the OLP and its function in protecting the motor.
Shows the main PCB with connector labels.
Illustrates the display and sub PCB with connector labels.
Troubleshooting steps for Freezer Sensor Error (FS E).
Troubleshooting steps for Refrigerator Sensor Error (rS E).
Troubleshooting steps for Icing Sensor Error (IS E).
Troubleshooting steps for Defrost Sensor Error (dS E).
Troubleshooting steps for Defrost Heater Error (dH E).
Troubleshooting steps for Freezer Fan Error (FF E).
Troubleshooting steps for Condenser Fan Error (CF E).
Troubleshooting steps for Communication Error (CO E).
Troubleshooting steps when the freezer LED lamp is not working.
Troubleshooting steps when the refrigerator LED lamp is not working.
Troubleshooting steps for poor cooling in the fresh food section.
Troubleshooting steps for poor cooling in the freezer compartment.
Explains how to enter TEST MODE and remove Terminal Position Assurance.
Provides temperature resistance and voltage data for FRZ and ICING sensors.
Provides temperature resistance and voltage data for REF and DEF sensors.
Describes the process for checking fan errors.
Information on testing the defrost controller assembly (fuse-m and sensor).
Instructions for testing the sheath heater.
Information on testing the damper.
Instructions for testing the freezer door switch.
Instructions for testing the refrigerator door switch.
Procedure for checking compressor voltage and IPM output.
Troubleshooting steps based on LED blink patterns (FCT0, Stroke Trip).
Steps for checking capacitor specifications and resistance.
Steps for activating protection logic and sealed system diagnosis.
A chart for diagnosing common refrigerator complaints.
Details the refrigeration cycle and common fault causes.
Explains the working principle of the ice maker and dispenser.
Details the various functions of the ice maker, like start, making, and ejection.
Instructions for operating the ice maker in test mode.
Explains the water supply function and its timing.
Information on the ice maker stop switch functionality.
Describes general functions like temperature control and ICE PLUS.
Details the open door alarm feature and its sound.
Describes the buzzer sound produced by buttons.
Explains the defrosting process and conditions.
Describes the sequence of electrical parts activation during operation.
Explains the automatic defect diagnosis and error codes.
Details how to operate and use the TEST Mode.
Exploded view of the main case parts of the refrigerator.
Exploded view of the freezer compartment parts.
Exploded view of the refrigerator compartment parts.
Exploded view of the refrigerator door parts.
Exploded view of the ice maker components.
Procedure for removing and replacing the refrigerator door.
Instructions for door gasket removal.
Steps to align refrigerator doors.
Procedure for removing the evaporator fan and motor.
Steps for removing the defrost control assembly.
Instructions for removing refrigerator and freezer compartment lamps.
Steps to remove the multi duct.
Procedure for removing and replacing the main PCB.
Detailed steps for removing and reinstalling the pullout drawer.
Instructions for removing and installing the top pull-out drawer.
Explains the role and usage notes for the freezer drawer compressor.
Explains the role and usage notes for the freezer swing model compressor.
Information on the PTC starter, its composition, and role.
Defines the OLP and its function in protecting the motor.
Shows the main PCB with connector labels.
Illustrates the display and sub PCB with connector labels.
Troubleshooting steps for Freezer Sensor Error (FS E).
Troubleshooting steps for Refrigerator Sensor Error (rS E).
Troubleshooting steps for Icing Sensor Error (IS E).
Troubleshooting steps for Defrost Sensor Error (dS E).
Troubleshooting steps for Defrost Heater Error (dH E).
Troubleshooting steps for Freezer Fan Error (FF E).
Troubleshooting steps for Condenser Fan Error (CF E).
Troubleshooting steps for Communication Error (CO E).
Troubleshooting steps when the freezer LED lamp is not working.
Troubleshooting steps when the refrigerator LED lamp is not working.
Troubleshooting steps for poor cooling in the fresh food section.
Troubleshooting steps for poor cooling in the freezer compartment.
Explains how to enter TEST MODE and remove Terminal Position Assurance.
Provides temperature resistance and voltage data for FRZ and ICING sensors.
Provides temperature resistance and voltage data for REF and DEF sensors.
Describes the process for checking fan errors.
Information on testing the defrost controller assembly (fuse-m and sensor).
Instructions for testing the sheath heater.
Information on testing the damper.
Instructions for testing the freezer door switch.
Instructions for testing the refrigerator door switch.
Procedure for checking compressor voltage and IPM output.
Troubleshooting steps based on LED blink patterns (FCT0, Stroke Trip).
Steps for checking capacitor specifications and resistance.
Steps for activating protection logic and sealed system diagnosis.
A chart for diagnosing common refrigerator complaints.
Details the refrigeration cycle and common fault causes.
Explains the working principle of the ice maker and dispenser.
Details the various functions of the ice maker, like start, making, and ejection.
Instructions for operating the ice maker in test mode.
Explains the water supply function and its timing.
Information on the ice maker stop switch functionality.
Describes general functions like temperature control and ICE PLUS.
Details the open door alarm feature and its sound.
Describes the buzzer sound produced by buttons.
Explains the defrosting process and conditions.
Describes the sequence of electrical parts activation during operation.
Explains the automatic defect diagnosis and error codes.
Details how to operate and use the TEST Mode.
Exploded view of the main case parts of the refrigerator.
Exploded view of the freezer compartment parts.
Exploded view of the refrigerator compartment parts.
Exploded view of the refrigerator door parts.
Exploded view of the ice maker components.
General| Type | freestanding |
|---|---|
| Style | bottom freezer |
| Color | stainless steel |
| Total Capacity | 24.1 cubic feet |
| Refrigerator Capacity | 16.4 cubic feet |
| Freezer Capacity | 7.7 cubic feet |
| Humidity Controlled Crispers | yes |
| Defrost System | automatic |
| Quick Freeze | no |
| Number of Refrigerator Door Bins | yes |
| Temperature Control | electronic |
| Interior Light | led |
| Dispenser | none |
| Ice Maker | yes |
| Water Filter | no |
| Air Filter | no |
| Door Alarm | yes |
| Smart Home | no |
| Annual Energy Consumption | 608 kilowatt hours |
| Voltage | 115 volts |
| Current | 20 amperes |
Weight and Dimensions| Depth | 34 7/8 inches |
|---|---|
| Height | 69 7/8 inches |
| Width | 32 3/4 inches |
| Net Weight | 235 pounds |
To Next Page
