To Next PageTo Next PageWhat to do if my LG Ranges oven control beeps and displays an Ferror code?
If your LG Ranges oven control is beeping and displaying an error code, check the main gas shut-off valve or the oven gas shut-off valve and call for service. Alternatively, remove power from the range for five minutes and then reconnect it. If the error code repeats, call for service.
Why is there too much smoke during the Self Clean cycle in my LG Ranges oven?
If you notice too much smoke during the Self Clean cycle of your LG Ranges oven, it indicates there is too much soil inside. Open the windows to ventilate the room. Press the Upper Clear/Off or Lower Clear/Off key and wait for the light to turn off before opening the door. Wipe up the excess soil and then reset the clean cycle.
How to fix LG LDG4315BD top burners that do not light or burn evenly?
If the top burners on your LG Ranges are not lighting or burning evenly, ensure the electrical plug is properly inserted into a grounded outlet. Remove the burners and clean them, checking for food or grease around the electrode area. Also, verify that all burner parts are correctly installed.
What can I do if some soils still remain after scrubbing my LG Ranges oven after running EasyClean®?
For LG Ranges, the EasyClean® feature works best when soils are fully soaked in water before starting the cycle. If stubborn soils remain, repeat the EasyClean® process with sufficient water or use the Self Clean feature for a thorough clean.
What to do if my LG LDG4315BD Ranges is still dirty after running the EasyClean® cycle?
The EasyClean® cycle on your LG Ranges only helps to loosen light soils to assist in hand-cleaning and doesn't automatically remove all soils. Some scrubbing is required after the cycle.
What to do if the Self Clean function is not working on my LG LDG4315BD?
If the Self Clean function isn't working on your LG Ranges, it may be because the oven temperature is too high. Allow the range to cool down to room temperature before resetting the controls. Also, make sure you are using the correct oven control settings.
What to do if LG LDG4315BD oven does NOT heat, F9, F19?
1. Check Electrical Wiring 2. Check igniter’s Resistance. 3. Check the Sensor.
What to do if clock is flashing on LG LDG4315BD?
Power outage or surge. Reset the clock. If the oven was in use, you must reset it by touching the Upper Clear/Off or Lower Clear/Off key. Reset the clock and any cooking functions.
Why is the clock flashing on my LG LDG4315BD?
A flashing clock on your LG Ranges indicates a power outage or surge. Reset the clock. If the oven was in use, reset it by touching the Upper Clear/Off or Lower Clear/Off key. Then, reset the clock and any cooking functions.
General| Style | double oven, freestanding |
|---|---|
| Color | black stainless steel |
| Main Capacity | 4.3 cubic feet |
| Extra Capacity | 2.6 cubic feet |
| Number of Main Compartment Racks | 0 |
| Number of Extra Compartment Racks | 0 |
| Number of Main Compartment Rack Positions | 4 |
| Number of Extra Compartment Rack Positions | 2 |
| Interior Light | yes |
| Fuel | gas, natural gas |
Weight and Dimensions| Depth | 28 15/16 inches |
|---|---|
| Height | 47 5/16 inches |
| Width | 30 inches |
| Net Weight | 224.9 pounds |
Instructions for installing and verifying the anti-tip device for range stability.
Safety guidelines for proper installation, grounding, and adjustment of the range.
Safety precautions and guidelines for using the gas surface burners.
Guidelines and safety precautions for using the broiler function.
Precautions and instructions for using the self-cleaning oven feature.
Safety warnings and operating guidelines for the oven.
Tips for efficient operation and energy conservation.
Identification of the various components of the gas range.
List of included and optional accessories for the gas range.
Initial checks and preparation before installing the gas range.
Tools and materials required for the installation process.
Instructions for unpacking, moving, and positioning the range.
Steps for securing the range to prevent tipping.
Procedure for safely connecting the range to the gas supply line.
Requirements for electrical hookup, grounding, and circuit protection.
Instructions for adjusting the leveling legs to ensure the range is stable and level.
Basic operation and safety precautions for using the gas surface burners.
Step-by-step guide on how to ignite and use the surface burners.
Instructions for using the bake function and temperature settings.
Instructions for using the convection bake function.
Instructions for using the convection roast function for meats and poultry.
Instructions and safety for using the broil function.
Instructions for cooking pizza using specialized oven settings.
Prerequisites and setup for using the Tag On smart phone feature.
How to use the Tag On feature to interact with the oven via smart phone.
Instructions for removing and reinstalling burner components for cleaning.
Instructions for cleaning the cooktop surface safely and effectively.
Explanation of the EasyClean® feature for quick oven cleaning.
Overview of the self-cleaning cycle, its operation, and safety.
Instructions for replacing the oven light bulb.
Procedure for removing and reinstalling the oven doors.
Answers to frequently asked questions about the range's operation and features.
Common issues and their solutions to help avoid unnecessary service calls.
How to use the Smart Diagnosis feature for troubleshooting.
Steps to use the LG Smart Oven app for diagnosis.
How to use the call center for diagnosis assistance.
How to get warranty service and find more information about the product.
