M
Matthew BoydSep 23, 2025
What to do if my LG LDG4313BD Ranges shows Sensing Fail, F1 (F4), F2 (F5)?
- MMelissa HopkinsSep 23, 2025
1. Reconnect. Is the Connector disconnected or loose? (Check connection of the Sensor) 2. Replace the Thermistor. Check: Pins 4 and 5 of CN60 and pins 5 and 6 of CN61 in main PCB Normal- approximately 1.09kΩ at 77°F(25°C).








