What to do if my LG Ranges oven control beeps and displays an Ferror code?
If your LG Ranges oven control is beeping and displaying an error code, check the main gas shut-off valve or the oven gas shut-off valve and call for service. Alternatively, remove power from the range for five minutes and then reconnect it. If the error code repeats, call for service.
Why is there too much smoke during the Self Clean cycle in my LG LDG4313BD oven?
If you notice too much smoke during the Self Clean cycle of your LG Ranges oven, it indicates there is too much soil inside. Open the windows to ventilate the room. Press the Upper Clear/Off or Lower Clear/Off key and wait for the light to turn off before opening the door. Wipe up the excess soil and then reset the clean cycle.
How to fix LG Ranges top burners that do not light or burn evenly?
If the top burners on your LG Ranges are not lighting or burning evenly, ensure the electrical plug is properly inserted into a grounded outlet. Remove the burners and clean them, checking for food or grease around the electrode area. Also, verify that all burner parts are correctly installed.
What can I do if some soils still remain after scrubbing my LG Ranges oven after running EasyClean®?
For LG Ranges, the EasyClean® feature works best when soils are fully soaked in water before starting the cycle. If stubborn soils remain, repeat the EasyClean® process with sufficient water or use the Self Clean feature for a thorough clean.
What to do if my LG LDG4313BD is still dirty after running the EasyClean® cycle?
The EasyClean® cycle on your LG Ranges only helps to loosen light soils to assist in hand-cleaning and doesn't automatically remove all soils. Some scrubbing is required after the cycle.
What to do if the Self Clean function is not working on my LG Ranges?
If the Self Clean function isn't working on your LG Ranges, it may be because the oven temperature is too high. Allow the range to cool down to room temperature before resetting the controls. Also, make sure you are using the correct oven control settings.
What to do if LG LDG4313BD Ranges oven does NOT heat, F9, F19?
1. Check Electrical Wiring 2. Check igniter’s Resistance. 3. Check the Sensor.
What to do if clock is flashing on LG LDG4313BD Ranges?
Power outage or surge. Reset the clock. If the oven was in use, you must reset it by touching the Upper Clear/Off or Lower Clear/Off key. Reset the clock and any cooking functions.
Why is the clock flashing on my LG LDG4313BD Ranges?
A flashing clock on your LG Ranges indicates a power outage or surge. Reset the clock. If the oven was in use, reset it by touching the Upper Clear/Off or Lower Clear/Off key. Then, reset the clock and any cooking functions.
To Next Page
General
