To Next Page

To Previous Page

20 INSTALLATION

Insert a strain relief through the hole in the

junction box. Tighten the ring nut to secure it

in place.

Insert the electrical cable through the hole in

the strain relief. Tighten 2 screws to secure the

cable.

Pull the existing wires through the openings

in the junction box. Tighten 2 screws to

reassemble the junction box in the appliance.

Pair the white, black, and green wires to the

matching colored wires from the dishwasher.

Then twist on the provided wire nuts tightly to

connect the corresponding wires.

Wrap electrical tape around each connection.

Fold the connected wires back into the junction

box and screw on the junction box cover.

WARNING

• Verify that the black wire is hot (120 V). If not,

or if you are unsure of the power supply, have it

checked by a licensed electrician.

CAUTION

• Do not leave stripped wire exposed. Trim

stripped wire to fit completely inside wire nuts.

Other manuals for LG LDP6797ST

Questions and Answers:

Need help?

Do you have a question about the LG LDP6797ST and is the answer not in the manual?

General