To Next Page

To Previous Page

24 INSTALLATION

Adjusting Leveling Feet

Adjust as needed until the dishwasher is completely

leveled.

Adjusting Front Leveling Feet

• Use a flat-blade screwdriver to turn the front leveling

feet and adjust the front of the tub.

• Turn the front leveling feet clockwise to raise the

front of the tub and counterclockwise to lower it.

• The adjustments work identically for both front

leveling feet.

When the flat-blade screwdriver is unavailable, use

a 1/4” square drive wrench( ) or 3/8” square drive

wrench( ) with 1/2” socket( ) to turn the front

leveling feet and adjust the front of the tub.

Adjust the front and rear leveling legs until they

are all in firm contact with the floor. Failure to level

the dishwasher may prevent the door from closing

properly and the dishwasher will not turn on.

Adjusting Rear Leveling Foot

• Use a Phillips screwdriver to adjust the rear leveling

foot and the rear of the tub using the center screw

at the base of the appliance in the front.

• Turn the center screw clockwise to raise the rear of

the tub and counterclockwise to lower it.

NOTE

• To avoid damaging the screw, do not use an electric

screwdriver.

Other manuals for LG LDP6797ST

Questions and Answers:

Need help?

Do you have a question about the LG LDP6797ST and is the answer not in the manual?

General