LG LF51 SERIES - Phone Jack Connection; RS-232 C Configurations and Set ID

32
ENGLISH
Troubleshooting
Cannot control the TV with the remote control.
• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote
control.
• Check if the batteries are still working and properly installed (
to
, to ).
No image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns o suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the Automatic Standby (Depending on model) / Sleep
Timer / Off Time is activated in the TIME settings.
• If there is no signal while the TV is on, the TV will turn o
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is
displayed.
• Turn the TV o/on using the remote control.
• Reconnect the HDMI cable.
• Restart the PC with the TV on.
Specications
Environment
condition
Operating
Temperature
0 °C to 40 °C
Operating
Humidity
Less than 80 %
Storage
Temperature
-20 °C to 60 °C
Storage Humidity Less than 85 %
Analogue TV
(Depending on Country)
Television system
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M,
PAL B/B
Programme coverage VHF, UHF, CATV
Maximum number of
storable programmes
200
External antenna
impedance
75 Ω
HDMI-DTV supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 480
31.469
31.5
59.94
60.00
720 x 576 31.25 50.00
1280 x 720
44.96
45
37.5
59.94
60.00
50.00
1920 x 1080
28.125
33.72
33.75
56.25
67.43
67.5
27
33.75
26.97
33.716
50.00
59.94
60.00
50.00
59.94
60.00
24.00
30.00
23.97
29.976
Component port connecting information
Component ports on the TV Y P
B
P
R
Video output ports on DVD player
Y P
B
P
R
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
Signal Component
480i / 576i O
480p / 576p O
720p / 1080i O
1080p
O
(Only 50 Hz / 60 Hz )