20 INSTALLATION
2
Fit the hinge over the hinge lever latch and slot
it into place. Rotate the hinge lever clockwise to
secure the hinge.
Hinge Lever Latch
Hinge Lever
3
Connect all the wire harnesses (1). Screw in the
ground wire (2).
4
Place the hinge cover in place. Insert and tighten
the cover screw.
Hinge Cover
Removing the Freezer Drawers
For models with two freezer drawers, remove both
drawers in the same way.
WARNING
To reduce the risk of electric shock, injury to
persons, and death, follow basic precautions,
including the following:
• Use two or more people to remove and install
the refrigerator doors and freezer drawer.
• Be careful of sharp hinges on both sides of the
drawer.
• When you lay the drawer down, be careful not to
damage the floor.
• Do not sit or stand on the freezer drawer.
• To prevent accidents, keep children and pets
away from the drawer. Do not leave the drawer
open. If the Durabase
®
storage bin is removed
from the freezer drawer, there is sufficient space
for a small child or pet to crawl inside.
1
Pull the drawer open to full extension.
2
Gently lift and pull out the ice bin.
To Next Page
Loading...
