iNSTALLATiON 1-/
Assembling fhe Freezer Drawer
With both hands, pull out each rail simultaneously until
both rails are fully extended.
Hook the door support Q into the rail tabs@ on both
sides.
Lower door into final position and tighten the screws (_).
Make sure you have the correct rail cover for each side.
Align the tabs on the covers with the assembly holes on
each rail, and snap the rail covers in place to secure.
Assembly
With the drawer pulled out to full extension, insert the
lower basket (_ in the rail
assembly.
_-_WARNING
If the Durabase divider is removed, there is enough
open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow them to touch or go
near the freezer drawer.
DO NOT step or sit down on freezer drawer.
To Next Page
Loading...
