- 6 -
1. Remove gasket
Remove the gasket from gasket channel at doorliner as
shown in the illustration below.
3-2 DOOR
●
Mullion Removal
1. Remove 2 screws.
●
Door Gasket Removal
2. Lift mullion up carefully.
3. Disconnect wire harness.
●
Door Gasket Replacement
1. Insert gasket into channel
Insert and press gasket into channels at doorliner.
2. Insert mullion into channel.
Insert the mullion into channel at door as shown below.
●
Mullion Replacement
1. Connect wire harness.
3. Assemble 2 screws.
Gasket
Gasket
Channel
To Next Page
Loading...
