Why is my LG LFXS29626 or Freezer section too cold?
If your LG refrigerator or freezer section is too cold, it is likely due to incorrect temperature control settings. Adjust the control one increment at a time and wait for the temperature to stabilize.
Why is my LG LFXS29626 Refrigerator not cooling?
If your LG Refrigerator or Freezer isn't cooling, first, make sure the refrigerator control is turned ON. If it was recently installed, allow up to 24 hours for each compartment to reach the desired temperature. Also, if the refrigerator was recently relocated, it should stand upright for 24 hours before connecting it to power. The refrigerator may also be in the defrost cycle; wait 30 minutes after the cycle is completed.
Why is my LG LFXS29626 not dispensing water?
If your LG Refrigerator is not dispensing water, dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminants from the system, especially after a new installation or recently connecting the water line. Make sure the dispenser panel is not locked by pressing and holding the Lock button for three seconds. Ensure the dispenser is set for water dispensing by pressing the Water button on the control panel. Check that the refrigerator or freezer doors are closed properly and that the tubing connecting the refrigerator to the house supply valve is not kinked. Finally, confirm that the house water supply is connected, the valve is turned on fully, and not clogged.
Why is my LG Refrigerator icemaker not working?
If your LG Refrigerator's icemaker isn't making ice, allow up to 24 hours for each compartment to reach the desired temperature after installation or recently connecting the icemaker. Ensure the icemaker is turned on. Connect the refrigerator to the water supply and turn the water shutoff valve fully open. Also, make sure that the icemaker shutoff (feeler arm) is not obstructed and that a reverse osmosis water filtration system is not reducing the water pressure.
Why is my LG Refrigerator and Freezer not cooling?
Several factors could be the reason for the lack of cooling. The refrigerator control might be set to OFF; in that case, turn the control ON. If the refrigerator is in the defrost cycle, wait 30 minutes after the cycle is completed. If the unit was recently installed, allow up to 24 hours to reach the desired temperature. Also, if the refrigerator was recently relocated or stored for a long time, let it stand upright for 24 hours before connecting it to power.
What to do if my LG LFXS29626 Refrigerator is not dispensing water?
If your LG refrigerator isn't dispensing water, it could be due to a few reasons. If it is a new installation, dispense 2.5 gallons of water to remove trapped air. Check if the dispenser panel is locked and unlock it by pressing and holding the Lock button for three seconds. Make sure the dispenser is set for water dispensing by pressing the Water button. If the water filter was recently replaced, dispense 2.5 gallons of water. Check for kinks in the tubing connecting the refrigerator to the house supply valve and straighten them. If the house water supply isn't connected or the valve is clogged, contact a plumber.
How to unlock ice dispenser on LG LFXS29626 Refrigerator?
To unlock the control panel and dispenser on your LG Refrigerator, press and hold the Lock button for three seconds. This is necessary if the dispenser display is locked.
Why is my LG LFXS29626 Refrigerator too warm?
If your LG Refrigerator or Freezer section is too warm, it may take up to 24 hours for each compartment to reach the desired temperature after installation. Ensure air vents are not blocked by rearranging items to allow proper airflow. Reduce the frequency and duration of door openings. The refrigerator should not be operated in temperatures above 110F. Allow hot food to cool to room temperature before putting it in the refrigerator. Also, make sure that the temperature control is set correctly and wait 30 minutes after the defrost cycle has completed.
Why is my LG LFXS29626 Refrigerator or Freezer section too warm?
If your LG refrigerator or freezer section is too warm, it might be because the unit was recently installed and needs up to 24 hours to reach the desired temperature. Blocked air vents can also cause this, so rearrange items to allow airflow. Avoid opening the doors too often or for long periods. Ensure the unit isn't in a hot location (above 110F) and allow hot food to cool before placing it inside. Check that the doors are closing correctly and that the temperature control is set properly. Also, wait 30 minutes after a defrost cycle.
Why is there moisture inside my LG LFXS29626 Refrigerator?
If your LG Refrigerator has interior moisture buildup, reduce the frequency and duration of door openings. Make sure the doors are closing correctly. Maintaining a reasonable level of humidity in the home will help control the amount of moisture. If the defrost cycle recently completed, wait 30 minutes. Ensure food is packaged correctly by wiping all containers dry and storing food in sealed packaging.
General| Brand | LG |
|---|---|
| Model | LFXS29626 series |
| Category | Refrigerator |
| Language | English |
To Next Page
