- 24 -
Copyright © 2016 - 2017 LG Electronics Inc. All
rights reserved. Only training and service purposes.
3-29 HOW TO REMOVE AND REINSTALL THE COVER ASSEMBLY,PCB
1. Open the Home bar. 2. Remove the gasket from gasket channel at
doorliner as shown in the illustration below.
4. Using the lever principle, Insert the Small Screw
Driver applies a force to hole.
5. Disconnect wire harness.
3. Remove a Screw.
6. Remove a screw.
Gasket Channel
Gasket
To Next Page
Loading...
