4. TROUBLE SHOOTING
- 141 -
Copyright © 2011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Check the pin and battery
Connect terminals of I/O connector
Connection OK?
No
Yes
Is the u- USB Cable
voltage 4.8V (or 5.0V)?
No
Yes
Is it charging properly
After turning on?
START
Check PMIC SMT status by X-ray
Exchange PMIC or Change the main
board and Retest
Change I/O connector
Change TA (or u-USB cable)
END
Yes
No
To Next Page
Loading...
