LG LG-P970 - 10 Calibration; General Description; Requirement

10. CALIBRATION
- 234 -
Copyright © 2011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
10. CALIBRATION

10. CALIBRATION
10.1 General Description
This document describes how to install and use the RF calibration software (Tachyon) of LG 3G mobile phone
with Infineon Chipsets.
10.2 Requirement
Requirements for RF calibration of LGE mobile phone are outlined in the following sections.
10.2.1 Hardware
Desktop or laptop computer
Agilent 8960 Series 10 (E5515C) Testset
GPIB card and cable for communicating with Agilent 8960 Series 10 Testset
Power Supply, or 4V battery, and power cable for putting power on the mobile phone.
Data(USB or UART) cables for connecting the mobile phone to computer’s serial port
RF cable
10.2.2 driver
National Instruments GPIB & VISA driver
LGE mobile USB driver
Data cable driver(optional)
10.2.3 System
Windows XP SP2 or better
RAM 512M or grater
HDD 1GB of available space