Why does the LG LH-T360 Receiver remote control not work properly?
The LG Receiver remote control might not be working for several reasons: * Ensure the remote is pointed directly at the remote sensor on the DVD/CD Receiver. * Make sure you are within 23 ft (7 m) of the DVD/CD Receiver. * Check for any obstacles between the remote and the receiver and remove them. * The batteries in the remote control might be dead; replace them with new ones.
How to fix LG Receiver when there is no sound?
If you are experiencing a lack of sound or very low sound levels with your LG Receiver, consider the following: * Ensure that the equipment connected with the audio cable is set to receive DVD audio signal output. * Check that the audio cables are securely connected. * Verify that the equipment connected to the audio cable is powered on. * The audio connecting cable may be damaged. If so, replace it.
What to do if there is no picture on my TV with LG Receiver?
If you are not getting a picture on your TV when using the LG Receiver, here are a few things to check: * Ensure that your TV is set to the correct video input mode to receive the DVD signal output. * Verify that the video cable is securely connected to both the receiver and the TV. * Make sure that your TV is turned on.
What to do if my LG Receiver has no power?
If your LG Receiver has no power, make sure the power cord is securely plugged into the wall outlet.
Why is there loud hum or noise heard from LG LH-T360 Receiver?
If you are hearing a loud hum or noise from your LG Receiver, consider the following: * The disc may be dirty, so try cleaning it. * Ensure the speakers and components are securely connected. * The DVD/CD Receiver may be too close to the TV, so try moving the TV away from the audio components.
Why is the playback picture poor on my LG LH-T360?
If the playback picture quality is poor on your LG Receiver, consider the following: * The disc may be dirty, so try cleaning it. * Ensure a disc is inserted in the device. (Check that the DVD or audio CD indicator in the DVD display is lit.) * Ensure that a playable disc is inserted. (Check the disc type, colour system and Regional code.) * Make sure the disc is placed with the playback side down. * Ensure the disc is placed correctly within the guide on the disc tray. * If a menu is on the TV screen, press the SETUP button to turn it off. * If the Rating level is set, cancel the Rating function or change the rating level.
Why won't my LG LH-T360 DVD/CD player work even when power is on?
If the power is on but the LG DVD/CD Receiver isn't working, make sure a disc is inserted. Check that the DVD or audio CD indicator in the DVD display is lit.
Why radio stations cannot be tuned in with LG LH-T360 Receiver?
If you are unable to tune into radio stations with your LG Receiver, consider the following: * Ensure the antenna is securely connected and properly positioned. * If the signal strength is weak, try tuning in the station manually. * Preset the stations.
How to brighten the front panel display on LG LH-T360?
To brighten the front panel display on your LG Receiver, press DIMMER on the remote control.
Identifies and describes the function of each control and connector on the unit.
Explains the functions of remote control buttons and battery installation.
Steps for connecting speaker systems and attaching the ferrite core for noise reduction.
Explains the functions of common playback buttons like OPEN/CLOSE, PAUSE, SKIP, SCAN, REPEAT.
Solutions for common problems like no power, no picture, or no sound.
Guidance for issues related to the remote control and front panel display.
Detailed technical specifications of the DVD/CD Receiver and speakers.
To Next Page
General
