To Next PageTo Next PageWhy is there a loud hum or noise coming from my LG LH-T502SH?
If you're hearing a loud hum or noise: * Clean the disc. * Ensure the speakers and components are securely connected. * Try moving the TV away from the audio components, as the DVD/CD Receiver might be located too close to the TV.
What to do if radio stations cannot be tuned in on LG LH-T502SH Receiver?
If you're having trouble tuning into radio stations: * Check that the antenna is securely connected and properly positioned. * If using automatic tuning, the signal strength of the stations may be too weak, try tuning in the station manually. * If tuning by scanning preset stations, preset the stations.
How to improve poor playback picture on LG LH-T502SH Receiver?
If the playback picture quality is poor, consider the following: * Clean the disc. * Insert a disc. Ensure that the DVD or audio CD indicator in the DVD display is lit. * Insert a playable disc, verifying the disc type, color system, and regional code. * Place the disc with the playback side down. * Ensure the disc is placed correctly within the guide on the disc tray. * If a menu is on the TV screen, press the SETUP button to turn it off. * If the Rating level is set, cancel the Rating function or change the rating level.
Why is there no sound from my LG LH-T502SH?
If you're not hearing any sound or only a very low-level sound from your LG Receiver, here are a few things to check: * Ensure the equipment connected with the audio cable is set to receive DVD audio signal output by selecting the correct input mode on the audio receiver. * Verify that the audio cables are securely connected into the jacks. * Make sure the equipment connected with the audio cable is turned on. * If none of these steps work, the audio connecting cable might be damaged; consider replacing it.
What to do if my LG Receiver remote control isn't working?
If your LG Receiver remote control isn't working correctly, consider these potential solutions: * Ensure that you are pointing the remote control at the remote sensor on the DVD/CD Receiver. * Make sure you are using the remote control within about 23 ft (7 m). * Remove any obstacles that might be blocking the path between the remote control and the DVD/CD Receiver. * Try replacing the batteries in the remote control with new ones.
Why can't I tune in radio stations on my LG LH-T502SH Receiver?
If you're having trouble tuning in radio stations on your LG Receiver: * Ensure the antenna is securely connected. * If using automatic tuning, the signal strength might be too weak; try tuning in the station manually. * If tuning by scanning preset stations, preset the stations.
Why won't my LG Receiver start playback?
If your LG Receiver isn't starting playback, consider the following: * Ensure a disc is inserted, and the DVD or audio CD indicator is lit. * Verify that the inserted disc is playable, checking the disc type, color system, and regional code. * Make sure the disc is placed with the playback side down. * Confirm the disc is placed correctly within the guide on the disc tray. * Clean the disc if it's dirty. * If a menu is on the TV screen, press the SETUP button to turn it off. * If the Rating level is set, cancel the Rating function or change the rating level.
Why do I hear loud hum or noise from my LG Receiver?
If you're hearing a loud hum or noise from your LG Receiver, it could be due to a few reasons: * The disc might be dirty, so try cleaning it. * The speakers and components might not be connected securely; ensure they are properly connected. * The DVD/CD Receiver might be too close to the TV; try moving the TV away from the audio components.
Why is there no sound coming from my LG Receiver?
If you're experiencing a lack of sound or very low sound, consider the following: * Confirm that the equipment connected to the receiver via the audio cable is set to receive the DVD audio signal output. * Check that the audio cables are securely connected to the jacks. * Ensure that the equipment connected with the audio cable is turned on. * If the audio connecting cable is damaged, replace it.
Why is there no picture on my LG LH-T502SH?
There might be several reasons why you're not seeing a picture: * Ensure your TV is set to the correct video input mode to receive the signal from the LG DVD/CD Receiver. * Check that the video cable is securely connected to both the receiver and the TV. * Verify that the connected TV is powered on.
General| Type | Home Theater System |
|---|---|
| Number of Channels | 5.1 |
| Audio Formats Supported | Dolby Digital, DTS |
| Connectivity | Optical |
| Supported Formats | MP3, WMA |
