Connecting14
Connecting
2
3. Attach the speakers to the speaker stands by
rotating the screws.
Do not catch the speaker cord between
speaker and the pole.
,
Note
4. Connect the speaker wire to the terminal on
the speaker. Make sure the wire marked black
goes in to the terminal marked “-”(minus) and
the other wire goes in to the terminal marked
“+”(plus)
Be careful that the speaker
does not fall down.
Otherwise it may result in
the speaker malfunction and
cause personal injury and/ or
property damage.
>
Caution
LHD645-FC.DARELLK_BOOK(Simple)_ENG_2402.indd 14 2015-01-16 9:06:42
To Next Page
Loading...
Need help?
General
