5
Insert
Insert the diffuser into the opening in the
vent panel and slide the diffuser all the way
over to lock the tabs in place. Position the
diffuser with the round opening above the
bottom of the vent panel to avoid
interference from the window sill.
NOTE
Best positioning Inverted U shape
• For a tighter seal, use "no residue" duct tape (not provided) to seal any gaps around the installed
panel assembly, around the diffuser, and between the sashes.
• For best results, keep the vent hose as short and straight as possible. However, shape the diffuser
end of the vent hose into an inverted U shape just inside the window to allow any rain or
condensation to drain out the window.
To Next Page
Loading...
Need help?
General
