Garden Hose Installation for Dehumidifying (Dry Mode Only)
1. Remove the drain plug when using the Dry (dehumidifying) mode.
2. Install a 1/2" (12,7 mm) inside diameter garden hose (not provided) into the continuous drain port
and place the open end of the hose over a floor drain or bucket.
NOTE
• Install the garden hose when you need dehumidification in high humidity.
• This product has a self-evaporative system. The condensing water will be recycled to cool the condenser.
This not only improves cooling efficiency, but also saves energy for you.
1
2
Drain plug
INSTALLATION
16
To Next Page
Loading...
Need help?
General
