Recording
10
Basic Recording
11
Select a function you wish to record by setting
FUNCTION SWITCH except TAPE function.
22
Insert a blank tape.
33
Press RECORD ( ) button.
TAPE PLAY ( ) button is pressed
automatically.
44
Start playing your CD or RADIO.
CD Synchronized Recording
This feature automatically records an entire CD into a
cassette.
11
Load a CD disc and Set FUNCTION SWITCH to
CD.
22
Insert a blank tape.
33
Press RECORD ( ) button.
TAPE PLAY ( ) button is pressed
automatically.
44
The synchronized recording is started
automatically after about 7 seconds.
To pause recording
Press TAPE PAUSE ( ) button. Press TAPE PAUSE
()button again to resume recording.
To stop recording
Press TAPE STOP/EJECT ( ) button.
(Your cassette deck will automatically stop at the end of
the tape.)
Notes
• If you wish to record from the desired track, select the
desired track with CD SKIP/SEARCH ( ,
) button before commencing CD recording.
• If bear noises sound when AM broadcast recording,
reset RIF on the rear panel.
Wind the tape to the point recording starts. (Use only normal tapes.)
• RECORD ( ) button
• TAPE PLAY ( ) button
• REWIND ( ) button
• FAST FORWARD ( ) button
•
TAPE STOP/EJECT( ) button
• TAPE PAUSE ( ) button
• +10 button
• CD REPEAT button
• CD BACKWARD SKIP/SEARCH ( ) button
• CD STOP ( ) button
• CD FORWARD SKIP/SEARCH ( ) button
• CD PLAY/PAUSE ( ) button