19INSTALLATION
ENGLISH
2 Fit the hinge a over the hinge lever latch b
and slot it into place. Rotate the lever
c
counterclockwise to secure the hinge.
3 Connect the wire harnesses d.
• The number of wire harnesses may vary
depending on the model.
4 Place the cover e in its place. Insert and
tighten the cover screw f .
Assembling the Left Refrigerator
Door
• Install the left refrigerator door after the right
door is installed.
1 Make sure that the plastic sleeve is inserted in
the bottom of the door. Install the refrigerator
door onto the middle hinge.
2 Fit the hinge a over the hinge lever latch b
and slot it into place. Rotate the lever c
clockwise and fasten the hinge.
3 Connect all the wire harnesses and the
ground wire.
• The number of wire harnesses may vary
depending on the model.
4 Push the water supply tube into the hole on
the top case and pull it through the backplate.
To Next Page
Loading...
