Why is ”LOCK DOOR” flashing in the display of my LG LRG30855ST Ranges?
If you see “LOCK DOOR” flashing in the display of your LG Ranges, it means the self-clean cycle has been selected but the door is not closed. Close the oven door.
Why is the “LOCKED DOOR” light is on when I want to cook on my LG LRG30855ST Ranges?
If the LOCKED DOOR light is on when you want to cook on your LG Ranges, the oven door is locked because the temperature inside the oven has not dropped below the locking temperature. Touch the CLEAR/OFF pad and allow the oven to cool.
Why will my LG LRG30855ST Ranges oven not self-clean?
If your LG Ranges oven will not self-clean, it could be because the oven temperature is too high. Allow the range to cool to room temperature before resetting the controls. Improperly set oven controls could also be the cause.
How to fix LG LRG30855ST Ranges top burners that do not light or burn evenly?
If the top burners on your LG Ranges aren't lighting or burning evenly, ensure the electrical plug is fully inserted into a properly grounded outlet. Also, the burner slits might be clogged, so remove and clean them, checking for food or grease around the electrode area. Finally, confirm that all burner parts are correctly installed.
What to do if “F—and a number or letter” flash in the display of LG LRG30855ST Ranges?
If you see “F—and a number or letter” flashing on the display of your LG Ranges, it indicates a function error code. First, try touching the CLEAR/OFF pad and allow the oven to cool for one hour before putting it back into operation. If the error repeats, disconnect power to the range for 5 minutes, then reconnect. If the error persists after this, call for service.
Why is my LG LRG30855ST oven not clean after a clean cycle?
If your LG Ranges oven is not clean after a clean cycle, it could be due to oven controls not being properly set. Also, if the oven was heavily soiled, clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.
Why does the display flash on my LG LRG30855ST?
If your LG Ranges display flashes, it indicates a power failure. Reset the clock.
Why am I getting control signals after entering cooking time or start time on my LG Ranges?
If you are getting control signals after entering cooking time or start time on your LG Ranges, you likely forgot to enter a bake temperature or cleaning time. Touch the BAKE pad and desired temperature or the SELF CLEAN pad and desired clean time.
Why is the oven temperature too hot or too cold on my LG Ranges?
If the oven temperature on your LG Ranges is too hot or too cold, the oven thermostat may need adjustment.
What to do if the oven door will not open after a clean cycle on LG Ranges?
If your LG Ranges oven door won't open after a clean cycle, it's likely because the oven is still too hot. Allow it to cool below the locking temperature.
General| Color | Stainless Steel |
|---|---|
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Continuous Grates | Yes |
| Wi-Fi Connectivity | No |
| Fuel Type | Gas |
| Cooktop Surface | Porcelain |
| Convection Oven | No |
| Width | 30 in |
Covers important safety notices, symbols, and hazard alerts.
Details anti-tip device importance, gas leak procedures, and California safety notice.
Covers safety, tools, materials, and location planning.
Details gas/electrical connections, anti-tip device, leveling, and clearances.
Addresses problems with burners, oven, clock, and timer with solutions.
To Next Page
