16 INSTALLATION
4 Lift the door from the middle hinge pin and
remove the door.
• Place the door, inside facing up, on a
nonscratching surface.
Removing the Right Refrigerator
Door
1 Detach all the wire harnesses a. Unscrew the
ground wire b.
• The number of wire harnesses may vary
depending on the model.
• Ground wire is only present on some models.
2 Rotate the hinge lever c clockwise. Lift the
top hinge d free of the hinge lever latch e .
• When lifting the hinge free of the latch, be
careful that the door does not fall forward.
3 Lift the door from the middle hinge pin and
remove the door.
• Place the door, inside facing up, on a
nonscratching surface.
Assembling the Right Refrigerator
Door
• Install the right-side door first.
1 Make sure that the plastic sleeve is inserted in
the bottom of the door. Lower the door onto
the middle hinge pin as shown in the figure.
us_main.book.book Page 16 Thursday, April 9, 2020 7:38 AM