Service Bulletin
Product : Majesty 4D
Bulletin # : CNZ201800037
Release Date : 2017.11.01
• The information is available through “https://gsfs-america.lge.com” with a valid ID.
• The information is intended for experienced technicians, not for customer .
• The information is subject to change or update without notice.
<Repair information>
1. Symptoms and Causes
a) Symptoms : Frost on the Freezer Guide, Rail
b) Causes : Plate Assy. C & Gasket Assembly Door not sealing well
2. Repair Instruction
▣ SVC method
-. Disassemble the plate assembly center ,and the Cover Assembly Front
then replace the Part 251B,if Cover Assembly Front is broken after disassemble, use a new
Cover Assembly Front(251A).
-. Disassemble the F/U & F/L Gasket Assembly Door, then replace the part 203A & 203B
There are improvements in the two parts.
-.Disassemble the FU & FL Door , then replace the part 201A & 201B
① Plate Assembly Center
② Cover Assembly Front
Remark:
When Installing the new parts,
install the plate assembly, center, first,
then Install the cover assembly front.
※ Detail SVC Guide please refer to page 6~page9
To Next Page
Loading...
Need help?
General
