Connecting
the Refrigerator
to a Water Source
Warning
Tools Required
Cold Water Supply
Water Connection Instruction Guide
Readall directions carefully before you begin.
Connect to potable water supply only.
• Standard screwdriver
• 7/16-inch and 1/2-inch open-end wrenches or two adjustable wrenches
• 1/4-inch nut driver
• 1/4-inch drill bit
• Hand drill or electric drill (properly grounded)
The icemaker water valve contains a flow washer which is used as a water
pressure regulator.
The icemaker needs to be connected to a cold water line with water pressure
30o-120psi(Ib/inch2)
To Next Page
Loading...
