1. SAFETY PRECAUTIONS
1-1. Warning
1. Be sure to make a safety check, if circuit is found,
components that appear to have overheated or are
otherwise damaged should be replaced with new
components.
2. After servicing, be sure that the protected equipment is
assembled.
3. When you don’t watch TV, use the POWER button turn it
off.
1-2. Notes
1. When inserting the instrument or circuit board, fix the
leads to the jack, before soldering.
2. Insert higher voltage resistors with a 10mm gap above
the PWB.
3. Don’t touch hot chassis leads.
2. FEATURE
2-1. Auto Program tuning
All stations that can be received are stored.
2-2. Auto Sleep
TV will automatically switch itself to standby mode
approximately ten minutes after TV station stops
broadcasting.
2-3. Auto Search (FM RADIO)
Press the TV/RADIO button and then hold CH▲ or CH▼
button for more than 1 second to select RADIO Menu.
TV-RADIO
- 107 -
To Next Page
Loading...
