ƒ¡33ƒ¡
6. Wrap the insulation material around the con-
necting portion.
CAUTION : Take care to arrange the pipings, drain
hose and cables as the feature 6 page for
inserting it into the indoor unit and mount
the indoor unit on the installation plate.
7. Wrap the tubing, the drain hose and the con-
necting cable with tape.
8. Indoor unit installation
• Hook the indoor unit onto the upper position of instal-
lation plate. (Engage the two hooks of the rear top of
the indoor unit with the upper edge of the installation
plate.)
Insure the hooks are properly seated on the installa-
tion plate by moving it in left and right.
Press the lower left and right side of the unit
against the Installation Plate until the hooks
engages with their slots (sound click).
To Next Page
Loading...
