LG LS090HEV - Timer Settings Management

14
Single Zone Mega and Mega 115V Wall Mounted Owner’s Manual
Due to our policy of continuous product innovation, some specications may change without notication.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
BASIC FUNCTIONS
Timer Settings
Single Zone Mega systems can be programmed through timer settings to turn the unit on and off at set times during the day and night. This
functionality allows you to save energy and utilize the air conditioner more efficiently.
Setting the Current Time
1. Press and hold for no longer than 3 seconds to initiate
setting functionality.
•The AM/PM icon will flicker at the bottom of the display screen.
2. Press the up and down buttons to scroll and then
select the minutes (hours will scroll).
3. Press when finished to exit the setting mode.
Setting an Automatic On Time
1. Press on the remote control.
•The ON icon will flicker to the right of the time display on the
display screen.
2. Press the up and down buttons to scroll and then
select the minutes (hours will scroll).
3. Press when finished to exit the setting mode.
Setting an Automatic Off Time
1. Press on the remote controller.
•The OFF icon will flicker to the right of the time display on the
display screen.
2. Press the up and down buttons to scroll and then
select the minutes (hours will scroll).
3. Press when finished to exit the setting mode.
Setting Sleep Mode
Sleep mode is used to automatically turn off the air conditioner at a
set time. It is a “countdown” timer and can be set for up to 7 hours
ahead of the current time.
1. Press to turn on the indoor unit.
2. Press to initiate sleep mode settings.
3. Press the up and down buttons to select the number of
hours.
4. Press to exit the setting mode.
• appears on the display screen to signify the unit has been set
to sleep mode.
Your display screen might appear slightly different depending on
your model.
In cooling and dehumidifying mode, the temperature increases
by 1.8 °F (1 °C) after 30 minutes and by an additional 1.8 °F
(1 °C) after another 30 minutes for a more comfortable sleep
environment. The temperature increases up to 3.6 °F (2 °C) from
the present temperature..
Cancelling Timer Settings
1. Press .
2. Press a second time to cancel all timer settings.
Timer Settings