Need help?Do you have a question about the LG LS090HSV5 and is the answer not in the manual?
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Type | Mini-Split |
| Power Supply | 208/230V, 60Hz |
| Noise Level (Indoor) | 19 dB(A) |
| Weight (Outdoor Unit) | 66 lbs |
Covers safety guidelines and warnings related to the installation process.
Details safety instructions and warnings for electrical wiring.
Provides safety instructions and warnings for operating the unit.
Explains unit model identification and lists included components.
Details technical specifications for various models.
Provides electrical data including voltage, amperage, and ratings.
Guidelines for selecting the optimal location for the outdoor unit.
Specifies minimum clearance requirements for safe operation and airflow.
Instructions for rigging, lifting, and securely mounting the outdoor unit.
Specifies minimum clearance requirements for the indoor unit.
Provides detailed steps for mounting the indoor unit.
Guidelines on refrigerant safety and allowable concentrations.
Details limitations for refrigerant piping connections.
Explains pipe expansion/contraction and calculation methods.
Instructions for performing flare and braze connections for refrigerant piping.
Illustrates basic pipe connections between indoor and outdoor units.
Details piping and wiring for units installed below or above each other.
Provides instructions for installing the indoor unit drain hose.
Guidelines for insulating all refrigerant piping correctly.
Specifies minimum wall thickness for EPDM insulation based on location.
General safety and regulatory guidelines for electrical installation.
Instructions for connecting power and communication cables.
Information on handheld remote and wired controller connections.
Steps for connecting electrical wiring to the indoor unit.
Steps for connecting electrical wiring to the outdoor unit.
Procedure for performing a triple leak and pressure test.
Steps for deep and triple evacuation of the system.
Instructions for adding refrigerant and completing the installation.
Steps for reattaching the indoor unit's bottom cover.
Guidance for conducting system test runs and evaluating performance.
Instructions for accessing installer mode for specific operations.
Using the SIMS app for monitoring, diagnosis, and troubleshooting.
Lists and explains error codes for indoor and outdoor units.
Addresses safety when refrigerant leaks may occur and concentration limits.
Checklist for initial installation of major components.
Checklist items for refrigerant piping and insulation.
Checklist for correct brazing practices.
Checklist for proper refrigerant piping installation.
Checklist items for condensate drain installation.
Checklist for power wiring and communication cable installation.
To Next Page
