What does Inverter Compressor Discharge Pipe (D-Pipe) Overheat mean on my LG LS240HEV1 Air Conditioner and how can I fix it?
If your LG Air Conditioner displays an error indicating Inverter Compressor Discharge Pipe (D-Pipe) Overheat, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does it mean when my LG Air Conditioner says the current-to-current transformer (CT) thermistor is too low?
If your LG Air Conditioner displays an error indicating that the current-to-current transformer (CT) thermistor is too low, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What to do if the outdoor unit inverter compressor PCB heat sink temperature is too high in my LG Air Conditioner?
If your LG Air Conditioner displays an error indicating that the outdoor unit inverter compressor PCB heat sink temperature is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does Current Transformer2 (CT2) error mean on my LG LS240HEV1 and how can I fix it?
If your LG Air Conditioner displays a Current Transformer2 (CT2) error, indicating that the alternating current (AC) input is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
Why LG LS240HEV1 does not work?
Your LG air conditioner might not be working due to several reasons: * The power cord might not be properly plugged into the outlet. Ensure it is securely connected. * A fuse may have blown, or the power supply could be blocked. Replace the fuse or check the circuit breaker. * There might have been a power failure. If so, turn off the air conditioner, wait 3 minutes after power is restored, and then turn it back on. * The voltage could be too high or too low, so check the circuit breaker. * The air conditioner might have turned off automatically due to a preset timer. Press the power button to turn it back on. * The batteries in the remote controller might be incorrectly installed or dead. Check the terminals (+) and (-) or replace them with new batteries.
What does it mean when my LG Air Conditioner says the inverter compressor DC voltage is too high?
If your LG Air Conditioner displays an error indicating that the inverter compressor DC voltage is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does PSC Fault mean on my LG LS240HEV1 Air Conditioner and how can I fix it?
If your LG Air Conditioner shows a PSC Fault, indicating that the current to the inverter compressor between the AC and DC converter circuit is too high, it's recommended to contact LG Support. A simple power down and restart might also help.
What does DC Peak (IPM Fault) mean on my LG LS240HEV1 and how can I fix it?
If your LG Air Conditioner displays a DC Peak (IPM Fault) error indicating that the compressor DC voltage was too high, contact LG Support. You can also try power cycling the unit by turning it off and then back on.
What to do if the outdoor unit condenser coil temperature is too high in my LG Air Conditioner?
If your LG Air Conditioner displays an error indicating that the outdoor unit condenser coil temperature is too high, contact LG Support. Additionally, try power cycling the unit by turning it off and then back on.
What to do if there is a communication failure from outdoor unit to indoor unit in my LG LS240HEV1?
If your LG Air Conditioner displays a communication failure from the outdoor unit to the indoor unit, please contact LG Support. You might also try turning the unit off and then back on to see if that resolves the problem.
General| Brand | LG |
|---|---|
| Model | LS240HEV1 |
| Category | Air Conditioner |
| Language | English |
General safety, installation, and operational precautions.
Safety guidelines for power connections, grounding, and wiring.
Safety precautions to take before performing maintenance tasks.
Details operation of the remote controller, its buttons, and modes.
How to set automatic on/off timers, sleep mode, and cancel them.
Troubleshooting for common problems like unit not working or poor cooling.
To Next Page
