- 79 -
2) Abnormal Refrigerator Sensor Error (1)
CHECKING FLOW RESULT & SERVICE ACTION
Check for a loose connection in CON7
Result
Service Action
Firmly plugged
Loose
Go to Step 2
Unplug connector and check between
White to White as is shown in the picture.
Result
Service Action
0 Ù
OFF
Go to Step 3
Other
Short
Open
Normal
Check the Temperature
and Resistance
(Temperature Chart #2)
Go to Step 7
1
2
NO.
3
1) Remove the Control Box in Refrigerator sensor.
2) Check for any loose connection.
3) Turn on the Refrigerator.
Connectors must be firmly .connected, and wires don’t be
have any damage.
Next Action: Go to Step 4.
To Next Page
Loading...
