Disconnect joint 1 as is marked in the picture.
8
NO.
CHECKING FLOW RESULT & SERVICE ACTION
9
Then check resistance value marked points.
10
11) Ice Cube Mode is not working
Remove Cover hinge in Freezer Door, and check
connection.
Result
Service Action
Firmly plugged
Loose
Go to Step 9
Result
Service Action
Replace Product
0 Ù
OFF
Go to Step 10
Unplug connector from Duct Motor and check the
resistance value in the connector.
Result
Service Action
Replace Door assembly
0 Ù
OFF
Explain to customer
- 95 -
To Next Page
Loading...
