25OPERATION
ENGLISH
3 The power on chime sounds, SEt appears in
the display, and the Wi-Fi icon (f) blinks.
4 Connect the appliance to the Wi-Fi network
using the smartphone app.
5 To disconnect the appliance from the
network, delete it from the connected
appliances in the app.
• See the "Smart Functions" section in the owner’s
manual for more details.
Settings (Hour Mode, Convection
Auto Conversion, Oven Thermostat,
Preheat Alarm Light, Beeper
Volume, Fahrenheit or Celsius)
Press the Settings button repeatedly to toggle
through and change oven settings.
The Settings button allows you to:
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
• adjust the oven temperature
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between
Fahrenheit and Celsius
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset
the clock to 24-hour mode, follow the steps below.
1 Press Settings once.
2 Press 1 to toggle between a 12-hour and 24-
hour clock.
3 Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically
converts the standard recipe temperature entered
to a convection temperature by subtracting 25 ℉ /
14 ℃. This auto converted temperature shows on
the display. For example, select Conv. Bake, enter
350 ℉, and 325 ℉ shows on the display after
preheat.
Convection Auto Conversion is enabled by default.
To change the setting, follow these instructions.
1 Press Settings repeatedly until Auto appears
in the display.
2 Press 1 to disable or enable auto conversion.
3 Press START to accept the change.
Adjusting the Oven Thermostat
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself
with the new oven, you still think that it is too hot
or too cold, you can adjust the oven thermostat
yourself.
• To begin, either raise or lower the thermostat
15℉ (8 ℃). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower
the thermostat again, using the first adjustment
as a gauge. For example, if the adjustment was
too much, raise or lower the thermostat 10 ℉ (5
℃). If the adjustment was not enough, raise or
lower the thermostat 20 ℉ (12 ℃). Proceed in
this way until the oven is adjusted to your
satisfaction.
1 Press Settings repeatedly until AdJU appears
in the display.
2 Use the number buttons to enter the number
of degrees you want to adjust the oven
temperature.
3 Adjust the temperature either up or down by
pressing Settings repeatedly to toggle
between plus (+) or minus (-).
4 Press START to accept the change.
• This adjustment does not affect the broiling or
Self Clean temperatures. The adjustment is
retained in memory after a power failure. The
oven temperature can be increased (+) or
decreased (-) as much as 35 ℉ or 19 ℃.
• Once the temperature is increased or decreased,
the display shows the adjusted temperature
until it readjusts.
To Next Page
Loading...
Need help?
General
