16 Multi Air Conditioner
Operating Instructions
o During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification
operation can be removed.
This function operate when the unit is turned off.
[Standard / Artcool Mirror / Ceiling Cassette Type]
1. Press the FUNCTION SETTING button 1 time.
Auto Clean symbol will blink.
2. Press the SET/CLEAR button to reserve or cancel the Auto Clean function.
[Standard Libero Type]
• Press the Auto Clean button.
If the Auto Clean function is reserved, whenever the unit is turned off, the indoor fan
is still running for about 30 minutes internally without cooling or dehumidification
operation. Also the louver is closed.
This dries up any remains of moisture & cleans the unit internally.
1. Press the TIMER button for 3 seconds.
2. Press TIME SETTING buttons
until the desired time is set.
Check the indicator for A.M. and P.M.
3. Press the SET / CLEAR button.
• If you wish to cancel all timer setting, press the CLEAR ALL or SET/CLEAR button.
• If you wish to cancel each timer setting, press the
TIMER button to turn timer sleep or on or off as you want.
And then press the SET/CLEAR button aiming the remote
controller at the signal receptor.
(The timer lamp on the air conditioner and the display will go off.)
1. Press the TIMER button to
turn timer on or off.
2. Press TIME SETTING buttons
until the desired time is set.
3. Press the SET / CLEAR button.
To cancel the Timer Setting
Timer Setting
Setting the Current Time
Auto Clean(Optional)
To Next Page
Loading...
Need help?
General
