LG LSN240HEV2 - Energy Display Function; Light Off Function; Comfort Air Function

19OPERATION
ENGLISH
FRANÇAIS ESPAÑOL
Using the Energy Display
Function (Optional)
This function displays the amount of electricity
generated on the indoor display as the product
operates.
Display the Current Energy Usage
1
Turn the appliance on.
2
Press
kW [3 s]
button and hold it about 3 seconds.
• The instantaneous power consumption (
or
kW
kWh
) is displayed for a while on some indoor
units.
Display the Cumulative Energy
Usage (Optional)
1
Turn the appliance on.
2
Press
kW [3 s]
button and hold it about 3 seconds
twice.
• The cumulative power consumption (
kW
kWh
) is
displayed for a while on some indoor units.
NOTE
• It is not displayed on the wireless remote control.
• kW refers to instantaneous power consumption.
• kWh refers to cumulative power consumption.
• If it is more than 99 kWh, which is the range of
expression, maintain it as 99 kWh.
• Power off resets its value.
• Display wattage under 10 kW(h) with 0.1 kW(h)
unit, and display one over 10 kW(h) with 1 kW(h)
unit.
• The actual power may differ from the power
displayed.
Using the Light Off Function
(Optional)
Display Screen Brightness
You can set the brightness of the indoor unit display
screen.
• Press LIGHT OFF button.
NOTE
• Turn on/off the Display screen.
Using the Comfort Air
Function (Optional)
Comfort Vane Operation
This function conveniently sets the vane to a preset
position to deflect the supply air away from blowing
directly onto the occupants in the room.
1
Turn the appliance on.
2
Press COMFORT AIR button repeatedly and
select the desired direction.
•
or is displayed on the display screen.
NOTE
•
or is displayed on some indoor units.
• This function is disabled when you press MODE or
JET MODE button.
• This function is disabled and auto swing of vertical
direction is set up when you press
SWING
button.
• When this function is off, the horizontal vane
operates automatically depending on the set mode.