10
Safety PrecautionsOperating InstructionsCare and MaintenanceTroubleshooting Tips
Cooling Auto Soft Dry Heating
(Heat pump model only)
To raise the temperature
To lower the temperature
Press the Start/Stop button.
The unit will respond with a beep.
To select Heating operation, press the Operation Mode
Selection button.
Each time the button is pressed, the operation mode is
shiftedinthedirectionofthearrow.
Set the temperature higher than the room temperature.
The temperature can be set within a range of 16°C~30°Cin
1°C increments.
You can select the fan speed in four steps–low, medium, high,
or CHAOS. Each time the button is pressed, the fan speed
mode is shifted.
Heating Operation(Heat pump model only)
1
2
3
4
To Next Page
Loading...
