9
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips
Cooling Auto Soft Dry Heating
(Heat pump model only)
To raise the temperature
To lower the temperature
Press the Start/Stop button.
The unit will respond with a beep.
To select Soft Dry operation, press the Operation Mode
Selection button.
Each time the button is pressed, the operation mode is
shiftedinthedirectionofthearrow.
Soft Dry Operation
1
2
Set the temperature lower than the room temperature. The
temperature can be set within a range of 18°C~30°Cin1°C
increments.
3
To Next Page
Loading...
