❏ SPECIFICATIONS
- 1-5 -
SECTION MODEL LX-M230A
General Power supply Refer to the back panel of the unit
Power consumption 50W
Mass 4.35kg
Extemal dimensions(W X H X D)
161 X 255 X 268mm
CD Frequency Response 40 -18000Hz
Signal-to-noise ratio 70dB
Dynamic range 70dB
Tuning Range 87.5 -108.0MHz
Intermediate Frequency 10.7 MHz
FM Signal-to-noise ratio 60/55 dB
Frequency Response 60 -10000Hz
Tuning Range 522-1611kHz or 530-1610kHz
AM Intermediate Frequency 450kHz
Signal-to-noise ratio 35 dB
Frequency Response 100 -1800 Hz
AMP Output Power 18W
T.H.D 0.15%
Frequency Response 40-25000Hz
Signal-to-noise ratio 80dB
TAPE Tape Speed 4.75cm/sec
Wow Flutter 0.25% (MTT-111,JIS-WTD)
F.F/REW Time 120sec(C-60)
Frequency Response 250-8000Hz
Signal-to-noise ratio 43dB
Channel Separation 50dB(P/B)/45dB(R/P)
Erase Ratio 55dB (MTT-5511)
Speaker MODEL LXS-M230
Type 1 Way 1 Speaker
Impedance 6Ω
Frequency Response 85-20000Hz
Sound Pressure Level 88dB/W(1m)
Rated Input Power 20W
Max.Input Power 40W
Net Dimension(W X H X D) 160 X 248 X 192mm
NOTE : Specification are subject to change without notice in the course of product improvement.
TUNER
To Next Page
Loading...
Need help?
General
