Operating Instructions (Accessory)
Owner's Manual 11
ENGLISH
Method to Operate and Select Air Volume – Interlinked Operation with Ventilation.
It can be used only when the air conditioner and the ventilator are interlocked. This function is to
cool off the air in the room using a ventilator while air conditioner function is operating.
Press 1 button on the remote controller.
- It can be used only when the air conditioner and the general ventilator are
interlocked.
Press
2 button in the Vent mode to run the ventilator.
Press
P button in the Vent mode to change the ventilation operation mode.
-
Each time you press the button the mode will change in the order of Heat exchange →
normal → auto.
h It only displays on the remote controller display when it is in ventilation mode, and it
displays the desired temperature when it returns to air condition mode.
Press
N button in the Vent mode to change the fan speed.
- Each time you press the button the fan speed is selected in the order of low
→
high
→
power.
-
If a CO
2
sensor is installed, you can select the fan speed in the order of low
→
high
→
power
→
auto.
How to convert to air conditioner mode
1) Auto conversion: if no button is selected for more than 15 seconds in the vent mode,
the system will convert to air conditioner mode automatically.
2) Manual conversion: press the
1 button in the vent mode to convert manually.
To Next Page
Loading...
