Safety Precautions
Service Manual 5
Do not touch electric leakage
circuit breaker or switch with
wet hands.
• It may cause electric shock.
Install the product in an
insulated space.
•
If the product is installed outside of
insulating layer(surface), it may cause a
dew formation inside main body, electric
shock, and dropping of condensed water.
Do not install in oily place
such as kitchen and factory.
• It may cause breakdown due to oils
stained to filter or electric heat
exchanger.
Do not install in
humid place such as
bathroom.
• It may cause electric shock
and breakdown.
Switch the power off
during cleaning.
• It may cause fire and
electric shock.
Do not connect
grounding line to
window frame
(chassis) and tap.
• It has a danger of electric
shock.
Do not carry the
product alone.
• Otherwise, it may cause
physical damage.
Do not use for special
purposes and places
including animals and
plants, sensitive
equipment, and art pieces.
• Otherwise, it may cause
physical damage.
Do not use strong
detergent such as
wax or thinner in case
of cleaning, instead
use soft cloth.
• It ruins external
appearance due to
discoloration or scratches
on the product.
Clean filter and heat
exchanger regularly
with your gloves on.
• With a large quantity of
dust in the product, the
effect of ventilation may be
reduced. (it may not well
ventilated)
In case of gas leakage,
open the window to
change air(ventilate)
before using remote
controller.
• It may cause explosion
and fire.
■ For Installation
■ For use
To Next Page
Loading...
Need help?
General
