What to do if my LG 3D TVs have no picture and sound?
If your LG 3D TV has no picture and no sound, verify that the TV is turned on and the power cord is properly inserted into the wall outlet. Try switching to another channel to rule out a broadcast issue. Check your antenna's direction and location. Finally, test the wall power outlet by plugging in another device.
How to fix LG M1950DM remote control when it's not working?
If the LG 3D TV remote control isn't working, first, make sure there are no obstructions between the remote and the TV. Ensure you're pointing the remote correctly and that the batteries are installed with the correct polarity. Try setting the correct remote operating mode (TV, VCR, etc.) and installing new batteries.
What to do if my LG 3D TV has no picture and no sound?
If your LG 3D TV has no picture and no sound, first check if the TV is turned on. Then, try another channel to rule out a broadcast issue. Ensure the power cord is securely inserted into the wall power outlet. Check your antenna direction and/or location. Finally, test the wall power outlet by plugging another product's power cord into it.
Why does my LG 3D TV suddenly turn off?
Your LG 3D TV might be turning off suddenly due to several reasons. Check if the sleep timer is set. Review the power control settings. Note that the TV will automatically switch off after 15 minutes without an input signal to save power. If you were playing a file from a USB drive, a broken file might be the cause. Finally, examine your energy saving menu settings, excluding the screen off mode.
Why does my LG 3D TVs power suddenly turn off?
If your LG 3D TV is suddenly turning off, check if the sleep timer is set or review the power control settings. Note that if the TV is on without an input signal, it will automatically switch off after 15 minutes to save power. Also, if you were playing a broken file in USB mode, the TV may turn off. Check the file in your USB storage. Ensure that the screen off mode of the energy saving menu is disabled. Power may be interrupted.
Why does the picture appear slowly after switching on my LG M1950DM 3D TVs?
It's normal for the picture to appear slowly after switching on your LG 3D TV, as the image is muted during the startup process. If the picture hasn't appeared after five minutes, please contact your service center.
How to fix LG LCD TV remote control that doesn’t work?
If the remote control for your LG LCD TV isn't working, check for obstructions between the remote and the TV. Make sure you're pointing the remote correctly and that the batteries are installed with the correct polarity. Verify the remote operating mode (TV, VCR, etc.) is correctly set. If problems persist, install new batteries.
Why does my LG LCD TV have picture but no sound?
If your LG LCD TV has picture but no sound, first, try adjusting the volume using the VOL(+, -) or VOL (, ) buttons. Ensure the sound isn't muted by pressing the MUTE button. Try switching to another channel, as the issue might be with the broadcast. Also, check if the audio cables are correctly installed.
What to do if LG LCD TV has no picture and no sound?
If your LG LCD TV shows no picture and has no sound, first check if the TV is turned on. Try switching to another channel to rule out a broadcast issue. Ensure the power cord is properly inserted into the wall power outlet. Also, check your antenna's direction and/or location. Finally, test the wall power outlet by plugging another product into it.
How to fix 'Invalid format' message on LG 3D TV?
If you see an 'Invalid format' message on your LG 3D TV, it means the signal from the PC is out of the vertical or horizontal frequency range. Adjust the frequency range by referring to the Specifications in this user’s guide.
General| Screen Size | 19 inches |
|---|---|
| Response Time | 5ms |
| Built-in Speakers | Yes |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Viewing Angle | 170/160 degrees |
| Input Connectors | HDMI |
To Next Page
