To Next Page
W
Whitney RamirezSep 7, 2025
How to remove lines or streaks in pictures on LG LCD TV?
- Kkristy35Sep 7, 2025
To address lines or streaks in the picture on your LG LCD TV, check the antenna and try changing its direction.
How to remove lines or streaks in pictures on LG LCD TV?
To address lines or streaks in the picture on your LG LCD TV, check the antenna and try changing its direction.
How to fix poor reception on some channels on LG LCD TV?
If you're experiencing poor reception on some channels with your LG LCD TV, it could be due to a few reasons. The station or cable product might be experiencing problems, so try tuning to another station. Alternatively, the station signal could be weak, so try reorienting your antenna to better receive the weaker signal. Also, check for any potential sources of interference.
Why does picture appear slowly after switching on LG LCD TV?
The image is muted during the product startup process. If the picture has not appeared after five minutes, contact your service centre.
Why does my LG 3D TV remote control not work?
If your LG 3D TV remote control isn't working, there might be a few reasons. First, ensure there are no obstructions between the remote and the TV. Make sure you are pointing the remote directly at the TV. Check that the batteries are correctly installed with the proper polarity (+ to -, + to -). Verify that the correct remote operating mode is selected (TV, VCR, etc.). If these steps don't resolve the issue, try installing new batteries.
What to do if LG LCD TV has no picture and no sound?
If your LG LCD TV shows no picture and has no sound, first check if the TV is turned on. Try switching to another channel to rule out a broadcast issue. Ensure the power cord is properly inserted into the wall power outlet. Also, check your antenna's direction and/or location. Finally, test the wall power outlet by plugging another product into it.
Why LG LCD TV remote control doesn't work?
If your LG LCD TV remote isn't working, try these steps: First, check for obstructions between the remote and the TV. Then, make sure you are pointing the remote correctly. Verify that the batteries are correctly installed with the right polarity (+ to -, + to -). Ensure the correct remote operating mode is set (TV, VCR, etc.). Finally, try installing new batteries.
How to fix 'Invalid format' message on LG 3D TV?
If you see an 'Invalid format' message on your LG 3D TV, it means the signal from the PC is out of the vertical or horizontal frequency range. Adjust the frequency range by referring to the Specifications in this user’s guide.
Why does my LG 3D TV automatically change picture settings?
If your LG 3D TV automatically reverts to the initial picture settings, it is likely set to Store Demo mode. To switch to Home use mode: From the TV Main menu, choose OPTION, then choose Initial Setting, and finally choose Home use.
What causes horizontal or vertical bars or picture shaking on LG 3D TVs?
If you observe horizontal or vertical bars, or the picture is shaking on your LG 3D TV, check for local interference from electrical appliances or power tools.
What causes horizontal or vertical bars or picture shaking on LG LCD TV?
Horizontal or vertical bars, or picture shaking on your LG LCD TV can be caused by local interference. Check for nearby electrical appliances or power tools that might be causing the disturbance.
General| Screen Size | 19 inches |
|---|---|
| Response Time | 5ms |
| Built-in Speakers | Yes |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Viewing Angle | 170/160 degrees |
| Input Connectors | HDMI |
