To Next Page
A
Angie RodriguezSep 14, 2025
How to fix no output from one of the speakers on LG 3D TVs?
- LLaura ContrerasSep 14, 2025
If there's no output from one of the speakers on your LG 3D TV, adjust the Balance settings in the menu.
How to fix no output from one of the speakers on LG 3D TVs?
If there's no output from one of the speakers on your LG 3D TV, adjust the Balance settings in the menu.
How to fix LG DM2780D remote control that doesn’t work?
If the remote control for your LG 3D TV isn't working, start by checking for any obstructions between the remote and the TV. Make sure you are pointing the remote directly at the TV. Verify that the batteries are installed correctly, paying attention to the polarity (+ to -, + to -). Ensure the correct remote operating mode is selected (TV, VCR, etc.). If problems persist, install new batteries.
What to do if my LG 3D TV has no picture and no sound?
If your LG 3D TV shows no picture and produces no sound, start by verifying that the TV is powered on. If it is on, try switching to another channel, as the issue might be with the broadcast signal. Also, check that the power cord is securely plugged into the wall outlet. Check your antenna direction and/or location. To ensure the outlet is functioning correctly, test it by plugging another device's power cord into it.
Why does my LG 3D TV suddenly turn off?
Your LG 3D TV might be turning off suddenly due to several reasons. Check if the sleep timer is activated. Also, examine the power control settings. If there is no input signal, the TV will automatically switch off after 15 minutes to save power. If a corrupted file was played from a USB device, the TV may turn off. Also, make sure the screen off mode of the energy saving menu is disabled. It is also possible that the power was interrupted.
Why is there unusual sound from inside my LG 3D TVs?
If you notice an unusual sound from inside your LG 3D TV, it may be due to changes in ambient humidity or temperature when the product is turned on or off. This does not indicate a problem with the TV.
How to improve color on LG 3D TVs?
If your LG 3D TV picture has no color, poor color, or poor picture quality, first try adjusting the Color settings in the menu. Ensure there is sufficient distance between the TV and any VCR. Try switching to another channel, as the broadcast itself may be the cause. Check that the video cables are correctly installed. Also, try activating any function to restore the brightness of the picture.
Why is there picture but no sound on my LG DM2780D 3D TVs?
If your LG 3D TV has picture but no sound, first, press the VOL(+, -) or VOL ( , ) button to increase the volume. Check if the sound is muted by pressing the MUTE button. Try switching to another channel as the problem may be with the broadcast. Ensure that the audio cables are properly installed.
Why are there lines or streaks in pictures on my LG 3D TV?
If you're seeing lines or streaks in the pictures on your LG 3D TV, try adjusting your antenna. You may need to change the direction of the antenna to improve the signal.
Why does my LG 3D TV have horizontal or vertical bars or picture shaking?
If your LG 3D TV is showing horizontal or vertical bars, or if the picture is shaking, check for local interference from electrical appliances or power tools.
Why does my LG 3D TV have poor reception on some channels?
Poor reception on some channels on your LG 3D TV can be due to a few reasons. The station or cable product may be experiencing problems, so try tuning to another station. If the station signal is weak, reorient your antenna to better receive the weaker station. Also, check for any sources of possible interference.
General| 3D | Yes |
|---|---|
| Pixel pitch | 0.3114 x 0.3114 mm |
| Aspect ratio | 16:9 |
| Display diagonal | 27 \ |
| Viewable size diagonal | 691.2 mm |
| Viewing angle, vertical | 160 ° |
| Contrast ratio (dynamic) | - |
| Display number of colors | 16.78 million colors |
| Viewing angle, horizontal | 170 ° |
| Display brightness (typical) | 250 cd/m² |
| USB hub version | 2.0 |
| DVI-D ports quantity | 0 |
| Product color | Black |
| Compliance industry standards | TUV-GS, FCC-B, CE |
| RMS rated power | 10 W |
| Tilt angle range | -5 - 18 ° |
| Panel mounting interface | 200 x 100 mm |
| AC input voltage | 100 - 240 V |
| Power consumption (off) | 0.5 W |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 47 W |
Weight and Dimensions| Depth (with stand) | 222.8 mm |
|---|---|
| Height (with stand) | 480.6 mm |
| Weight (with stand) | 6000 g |
| Depth (without stand) | 57.6 mm |
| Width (without stand) | 644 mm |
| Height (without stand) | 407.8 mm |
| Weight (without stand) | 5000 g |
Check product box for included items and contact dealer if any are missing.
Identifies and describes the TV's physical buttons and connection panel.
Provides essential precautions for safely moving and lifting the television.
Detailed instructions for securely attaching the TV's stand base.
Step-by-step guide on how to detach the TV stand base from the unit.
Instructions for properly placing and setting up the TV on a table.
Guidelines and considerations for safely mounting the television on a wall.
Explains the function and operation of each button on the remote control.
How to connect an antenna or cable for receiving TV signals.
Steps to connect the TV to a cable box for viewing television content.
Guide for the initial TV setup, including language and country selection.
Instructions for automatically tuning and storing available TV channels.
How to manually tune digital and analogue TV programmes.
How to manage and reorder the TV's programme list for easier access.
How to skip or reorder programme numbers in DTV/RADIO and TV modes.
Guide to updating the TV's software via broadcast for improved functionality.
View TV information and use CI modules for encrypted services.
How to view, select, and page through stored TV programmes.
How to set up and manage a list of favourite programmes for quick access.
How to resize the image to achieve optimal viewing size and quality.
How to select input sources and add custom labels for connected devices.
How to set the TV's display language and select the appropriate country.
How to select audio and subtitle languages for digital broadcasts.
How to lock TV buttons and set parental controls for program blocking.
How to access and utilize frequently used menu options.
Explains how to use the EPG for viewing TV programme listings.
Details button functions for various EPG modes (NOW/NEXT, 8 Day, Date Change).
Details button functions for extended descriptions and setting reminders.
How to connect a PC to the TV using HDMI or DVI to HDMI cables.
How to connect a PC to the TV using an RGB cable for display.
How to select image modes and customize image options for PC display.
How to customize display settings like resolution and auto-configuration for PC.
How to select sound modes and customize sound options for PC audio.
How to connect USB devices and access multimedia files.
How to navigate and view photo, music, or movie files on a USB device.
How to view photo files saved on a USB storage device.
How to play music files stored on a USB storage device.
How to play video files stored on a USB storage device.
How to register and deregister your TV for DivX VOD content.
Overview of the TV's 3D display capabilities and requirements.
Important safety warnings and precautions for viewing 3D content.
Cautions and guidelines for the proper and safe use of 3D glasses.
Information on optimal viewing distance and angle for 3D image viewing.
How to play and view 3D content, including mode selection.
Settings and options for customizing 3D viewing effects and modes.
How to navigate and access the TV's main menu structure.
Settings related to programme tuning, software updates, and diagnostics.
Settings for adjusting image size, quality, picture modes, and effects.
Settings for adjusting sound quality, sound modes, and audio options.
Settings for managing time, date, and automatic TV on/off functions.
Customizes general TV settings like language, country, and input labels.
Settings for locking channels, programmes, buttons, and parental guidance.
Settings for selecting and managing input sources connected to the TV.
Settings for interacting with USB devices, including media lists.
Table summarizing video and audio connection types for external devices.
How to connect Camcorders, Cameras, HD receivers, DVDs, and VCRs.
How to connect a PC to the TV using HDMI, DVI to HDMI, or RGB cables.
How to connect devices using composite, Euro Scart, and audio connections.
How to connect headphones and USB storage devices to the TV.
How to select teletext pages by entering a three-digit number.
How to navigate teletext using color fields and block/group selection.
How to turn the teletext feature on and off using the TEXT button.
Advanced teletext functions including Fastext page selection and special features.
How to access and use digital teletext services for enhanced information.
How to clean the TV screen and frame using appropriate cloths.
How to clean the TV cabinet and stand safely.
Instructions for maintaining the power cord by removing dust.
Solutions for common issues like remote control or power problems.
Solutions for problems related to no picture, no sound, or poor quality.
Solutions for picture setting problems and no image in PC mode.
Solutions for 'Unknown Product' messages and abnormal screen images.
Explanation for swirling oil-like patterns on the TV screen when turned off.
Solutions for issues preventing proper viewing of 3D images.
Important notes regarding 3D viewing with digital broadcasting.
Details on the TV's LCD panel type, size, and pixel pitch.
Specifications for video signals and available input connectors.
Information on power requirements, adapter, and physical dimensions.
Operating/storage conditions and TV tilt range specifications.
How to set up external control via RS-232C port and connector details.
Details on RS-232C wiring configurations and communication parameters.
List of commands for controlling the TV externally via RS-232C.
Protocol for transmitting and receiving commands for external control.
