LG DM2780D - Troubleshooting 3 D Mode; Swirling Pattern on Screen When Off; Cannot See 3 D Image Properly; Notes for 3 D Digital Broadcasting Viewing

ENGLISH
82
TROUBLESHOOTING WHEN USING 3D MODE
TROUBLESHOOTING WHEN USING 3D MODE
I can see a swirling oil-like pattern on the TV when the TV is turned off.
ThisiscausedbytheinterferenceofexternallightintheairlayerbetweentheLCDsurfaceand3Dfilter.
Thepatternbecomesalmostinvisiblewhenyouturnonthepoweragain.
I cannot see 3D image properly
Problem Resolution
Ifyouarenotusingtheglasses
providedwiththeTV.
Whenyouview3DimageswiththisTV,itisveryimportantthatyouusethe
glassesprovidedwiththeTV.Theglassesaredesignedtocompensateoptically
forthe3DfilterattachedtothesurfaceoftheTV.Ifyouwearthird-partyglasses,
youmaynotsee3DimagesproperlyontheTV.
Ifyouview3Dimagesoutsidethe
optimalviewingangleordistance.
TheoptimalviewingangleofthisTVisbetween14°degrees;theoptimalviewing
distanceisbetween50cmto90cmfromtheTV.Whenyouview3Dimages
outsidetheoptimalviewingangleorviewingdistance,theimagesmaylook
overlappedornotbedisplayedproperlyin3D.
Notes for Viewing 3D Image with 3D Digital Brodcating
*In Analogue Brodcating, 3D Imaging does not work.
Problem Resolution
Whenswitchingthe2Dimage
displaytothe3Dimagedisplay
withthe3Dbuttonontheremote
control,theoverlappedimagemay
bedisplayed.


Disablethe3Dimagingmodewiththe3Dbutton.


The3Dimagingmodeisdisabledautomaticallyifyouchangethechannel.
Ifthescreenisdividedintoleft/right
ortop/bottomwhenyouchangethe
channel
 
Thischannelsupportsthe3Dimagingmode.Selectthe3Dimagingtype
displayedonthescreenbypressingthe3Dbuttonontheremotecontrol.
Ifyoureyesaresoreorthescreen
looksblurrywhileviewing3D
images.
SelectLeft/RightorRight/Leftoption,whichyoufindbetterforviewing3D
images.