69
PICTURE CONTROL
You can watch the screen in various picture formats: 16:9, Just Scan, Original, Full Wide, 4:3, 14:9,
Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on
the screen and remain visible.
You can adjust the enlarge proportion using ꕌꕍ button.
This function works in the following signal.
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
1
2
Select Aspect Ratio.
Select the desired picture format.
• You can also adjust Aspect Ratio in the PICTURE
menu.
• For Zoom Setting, select 14:9, Zoom and Cinema
Zoom in Ratio Menu. After completing Zoom
Setting, the display goes back to Q.Menu.
• 16:9
The following selection will allow you to
adjust the picture horizontally, in linear pro-
portion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs).
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
• Original
When your TV receives a wide screen signal
it will automatically change to the picture
format broadcast.
• Full Wide
When TV receives the wide screen signal,it
will lead you to adjust the picture horizontally
or vertically, in a linear proportion,to fill the
entire screen fully.
Full WideJust Scan
Original
To Next Page
Loading...
Need help?
General
