36
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Connecting with an HDMI to HDMI cable
Connect the HDMI output of the PC to the HDMI/DVI IN1
or HDMI/DVI IN2 jack on the SET.
Turn on the PC and the SET.
Select HDMI 1 or HDMI 2 input source using the INPUT
button on the remote control.
1
2
3
1
NOTE
► Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed
HDMI
Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
►If you want to use HDMI-PC mode, you must set the input label to PC mode.
!
To Next Page
Loading...
Need help?
General
