When connecting with a Euro Scart
Connect the Euro scart socket of the DVD to the Euro scart
socket of the set.
Press the
IINNPPUUTT
button to select
AV 1.
Press the
PPLLAAYY
button on the DVD.
The DVD playback picture appears on the screen.
2
3
1
1
NOTE
GG
Please use the shield scart cable.
When connecting HDMI cable
Connect the HDMI output of the DVD to the
HHDDMMII//DDVVII IINN
jack on the set.
Select HDMI/DVI (DTV) input source with using
the
IINNPPUUTT
button on the remote control.
2
1
1
GG
Set can receive the video and audio signal simultaneously with using a HDMI cable.
GG
If the DVD supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
GG
If the DVD player does not support Auto HDMI, you need to set the DVD output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
GG
When the output device is HDMI / DVI Settop box or DVD.
GG
If the output device does not meet the selected HDMI mode, the abnormal or black screen may be displayed.
GG
In this case, select the HDMI mode appropriate for the output device, and turn off the DC power and then turn on it again.
NOTE
To Next Page
Loading...
