LG M3200C-BAF - RS-232 C Temperature and Fan Commands; Commands for Temperature, Fan, and Lamp Check

A16
ENGLISH
*29. Temperature value Return(Command : d n) - Optional
To read the inside temperature value.
Transmission
[d][n][][Set ID][][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[n][][Set ID][][OK/NG][Data][x]
Data are 1 byte long in Hex ASCII format.
*30. Fan On/Off(Command : d o) - Optional
To control Fan On/Off to set.
Transmission
[d][o][][Set ID][][Data][x]
Data 0 : Fan Off 1 : Fan On
Acknowledgement
[o][][Set ID][][OK/NG][Data][x]
*31. Lamp fault Check(Command : d p) - Optional
To check lamp fault.
Transmission
[d][p][][Set ID][][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[p][][Set ID][][OK/NG][Data][x]
Transmission / Receiving Protocol
▲
▲
▲