EasyManua.ls Logo

LG MA12R - Page 41

LG MA12R
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
TROUBLESHOOTING
ENGLISH
Performance
The air conditioner
changes generated
airflow during
operation.
When the appliance reaches the desired temperature, the airflow rate
reduces in order to avoid generating cool airflow during heating, or to
minimize energy consumption and indoor humidity change during
cooling.
This symptom is normal.
It seems that
condensation is
leaking from the air
conditioner.
Condensation occurs when the airflow from the air conditioner cools the
warm room air.
This symptom is normal.
Symptoms Possible Cause & Solution
The indoor unit is still
operating even when
the appliance has been
turned off.
The Auto Clean function is being operated.
• Allow the
Auto Clean
function to continue since it reduces any remaining
moisture inside the indoor unit. If you do not want this function, you can
turn the indoor unit off.
The air outlet on the
indoor unit is
discharging mist.
The cooled air from the appliance makes mist.
When the room temperature decreases, this phenomenon will disappear.
Water leaks from the
outdoor unit.
In the heating operations, condensed water drops from the heat
exchanger.
Install a drain hose under the base pan. Contact the installer.
There is noise or
vibration.
A clicking sound can be heard when the appliance starts or stops due to
movement of the reversing valve.
Creaking sound: The plastic parts of the indoor unit creak when they
shrink or expand due to sudden temperature changes.
Noise is normal during or after operation. It is not a sign of malfunction.
Flowing sound: This is the flow of refrigerant through the appliance.
Blowing sound: This sound generates when compressed air is released
into the atmosphere.
This is the sound of the dehumidifying water being processed inside the
air conditioning unit.
These are normal symptoms. The noise will stop.
Crack sound is heard. This sound is generated by the expansion or constriction of the front
panel, etc. due to changes of temperature.
These are normal symptoms. The noise will stop.
Symptoms Possible Cause & Solution

Related product manuals